Nippon 5400 Wall Sealer 18 Litre

---

5400 Wall Sealer is a Styrene acrylic water-based wall sealer. It is specially formulated for interior
and exterior walls to protect the finishing coats against the effects of mild alkalinity and moisture
from the substrate.

Drying Time : Touch Dry
: Hard Dry
: 15 minutes (Dependent on temperature and humidity)
: 1 hour (Dependent on temperature and humidity)
Recoating Time : 2 hours minimum (Dependent on temperature and humidity)
Dry Film Thickness : Around 30 m per coat
No. of Coats : 1 coat
Theoretical Coverage
Volume Solid
Shelf Life
: 10 12 m2 per litre per coat (Actual coverage is dependent on substrate condition, application
method, application condition and finishing appearance)
: ~ 34 %
: Up to 36 months in tight sealed container

Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven
surfaces with suitable fillers. Smoothen the filler areas with sand paper. Surfaces to be painted must be cleaned
thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior
to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting
specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the
walls to be below pH9.) Spot prime with 5400 Wall Sealer.

Keep container tightly closed and keep out of reach children or away from food and drink.
Ensure good ventilation during application and drying.
When applying paint, it is advisable to wear eye protection.
In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
Remove splashes from skin by using soap or water.
Paint must always be stored in a cool place.
When transporting paint, care must be taken. Always keep container in a secure upright position.
Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.

OUR WEBSITE IS http://www.velocitydiy.com
CONTACT NUMBER IS +6014-9891223